CJTVQ - 92291A,P170 TONER CARTRIDGE FOR HP LASERJET IIISI

  • MSDS: CJTVQ
  • Manufacturer: CANON INC
  • Product Name: 92291A,P170 TONER CARTRIDGE FOR HP LASERJET IIISI
  • National Stock Number: 6850-01-343-6998
Product Identification

Product ID:92291A,P170 TONER CARTRIDGE FOR HP LASERJET IIISI
MSDS Date:11/15/1990
FSC:6850
NIIN:01-343-6998
Status Code:A
MSDS Number: CJTVQ

Responsible Party
CANON INC
30-2 SHIRMOMARUKO 3 CHOME,OMTA-KU
TOKYO, JAPAN

Emergency Phone: 308-323-2987(HP)

Info Phone: 03-758-2111

Cage: EO274

Contractor
HEWLETT-PACKARD CO BOISE DIV
BOISE, ID 83714 US

Telephone: 208-396-6000

Cage: 18660

Ingredients

STYRENE ACRYLATE COPOLYMER

OSHA PEL NOT PROVIDED.

ACGIH TLV: NOT PROVIDED.


IRON OXIDE

CAS: 1317-61-9

OSHA PEL NOT PROVIDED.

ACGIH TLV: NOT PROVIDED.


AMORPHOUS SILICA

CAS: 7631-86-9

ACGIH TLV: 10 MG/M3 (TDUST)

Hazards

LD50 LC50 Mixture:NOT PROVIDED.
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TONER POWDER IS NOT ACCESSABILE,
UNLESS THE CARTRIDGE IS FORCED TO BE BROKEN. EFFECTS OF
OVEREXPOSURES: INHILATION:TONER IS FINELY DIVIDED SOLID. DO NOT
BREATHE THE DUST. EYE CONTACT: NO SPECIFIC HAZA RD IS KNOWN TO
CANON. HOWEVER, ANY MATERIAL THAT CONTACTS THE EYE MAY BE
IRRITATING. SKIN CONTACT: LOW HAZARD FOR INDUXTRIAL HANDLING. NO
DATA AVAILABLE FOR CHRONIC EFFECTS OR OVEREXPOSURE.
Explanation of Carcinogenicity:NO CARCINOGEN OR POTENTIAL
CARCINOGEN,ACCORDING TO IARC MONOGRAPHS, NTP,OSHA REGULATION.
Effects of Overexposure:TONER POWDER IS NOT ACCESSABILE, UNLESS THE
CARTRIDGE IS FORCED TO BE BROKEN. EFFECTS OF OVEREXPOSURES:
INHILATION:TONER IS FINELY DIVIDED SOLID. DO NOT BREATHE THE DUST.
EYE CONTACT: NO SPECIFIC HAZA RD IS KNOWN TO CANON. HOWEVER, ANY
MATERIAL THAT CONTACTS THE EYE MAY BE IRRITATING.
Medical Cond Aggravated by Exposure:NOT PROVIDED.

First Aid

First Aid:EYE CONTACT: FLUSH WITH PLENTY OF WATER. SKIN CONTACT: WASH
WITH SOAP AND WATER.

Fire Fighting

Flash Point:NO DATA .
Autoignition Temp:Autoignition Temp Text:N/ DAT
Lower Limits:NOT AVAILABL
Upper Limits:NOT AVAILABL
Extinguishing Media:CO2,WATER,DRY CHEMICALS
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NON-FLAMMABLE SOLID. THIS MATERIAL LIKE
MOST ORGANIC MATERIAL IN POWDER FORM,IS CAPABLE OF CREATING A DUST
EXPLOSION.

Accidental Release

Spill Release Procedures:NO TONER SPILLAGE OCCURS IN NORMAL OPERATION
OR HANDLING. IF IT SHOULD OCCUR, AVOID INHILATION OF THE DUST.
SWEEP MATERIAL ONTO PAPER OR COLLECT IT.
Neutralizing Agent:NOT RELEVANT.

Handling

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
AWAY FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NOT PROVIDED.

Exposure Controls

Respiratory Protection:NONE REQUIRED.
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT
Protective Gloves:NONE REQUIRED.
Eye Protection:NONE REQUIRED.
Other Protective Equipment:NONE REQUIRED.
Work Hygienic Practices:NOT PROVIDED.
Supplemental Safety and Health
NONE

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:N/A FOR SOLID MIXTURE
Melt/Freeze Pt:=100.C, 212.F
M.P/F.P Text:TO 150 C
Vapor Pres:NEGLIGIBLE
Spec Gravity:1.4 TO 1.6
pH:NOT APPLICABLE.
Viscosity:NOT APPLICABLE.
Evaporation Rate & Reference:NEGLIGIBLE(BUAC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TONER IS FINE POWDER,WITH SLIGHT PLASTIC ODOR.
Percent Volatiles by Volume:NEGLIGIBLE
Corrosion Rate:NOT APPLICABLE.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NOT PROVIDED.
Hazardous Decomposition Products:CARBON DIOXIDE AND POSSIBLY CARBON
MONOXIDE.

Disposal

Waste Disposal Methods:THIS PRODUCT IS CONSTRUCTED FROM PLASTICS AND
METALS. THE WASTE TONER COULD BE CONSIDERED AS PLASTIC WASTE.
DISPOSAL SHOULD BE SUBJECT TO FEDERAL, STATE, AND LOCAL LAWS.

Toxicology

Toxicological Information:NOT PROVIDED.

Ecology

Ecological:NOT PROVIDED.

Regulatory

SARA Title III Information:NOT PROVIDED.
Federal Regulatory Information:NOT PROVIDED.
State Regulatory Information:NOT PROVIDED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.